ISSN 0169-4243, Online ISSN: 1568-5616
< previous issue | next issue > | all issues
Fibrin-free intraocular lens for hindering secondary cataract with UV-photon-induced photochemical surface modification pp. 1687-1697(11) Authors: Yuji Sato; Masataka Murahara
Influence of water immersion on the single-lap shear strength of aluminum joints bonded with aluminum-powder-filled epoxy adhesive pp. 1699-1710(12) Authors: M. Al-Harthi; R. Kahraman; B. Yilbas; M. Sunar; B. J. Abdul Aleem
Hydrophilic/electron-acceptor surface properties of metallic biomaterials and their effect on osteoblast cell activity pp. 1711-1722(12) Authors: L. Bren; L. English; J. Fogarty; R. Policoro; A. Zsidi; J. Vance; J. Drelich; N. Istephanous; K. Rohly
The effect of hyper-branched polymers on the properties of dental composites and adhesives pp. 1723-1737(15) Authors: H. Dodiuk-Kenig; K. Lizenboim; I. Eppelbaum; B. Zalsman; S. Kenig
Study of adhesion forces and mechanical properties of human skin in vivo pp. 1739-1758(20) Authors: C. Pailler-Mattéi; H. Zahouani
Acrylic emulsion pressure-sensitive adhesives (PSAS) reinforced with layered silicate pp. 1759-1770(12) Authors: Hao Li; Yukun Yang; Yunzhao Yu
Characterization and tribological properties of two polyimide thin films sputtered onto a copper substrate pp. 1771-1781(11) Authors: Satoru Iwamori; Akihiro Uemura; Yoshinori Yamada
Effects of blending and coating methods on the performance of SIS (styrene-isoprene-styrene)-based pressure-sensitive adhesives pp. 1783-1797(15) Authors: Dae-Jun Kim; Hyun-Joong Kim; Goan-Hee Yoon
Evaluation of adhesion of continuous fiber–epoxy composite/aluminum laminates pp. 1799-1813(15) Authors: E.C. Botelho; R.A. Silva; L.C. Pardini; M.C. Rezende
Investigation of surface molecular orientation of poly(dimethylsiloxane-co-diphenylsiloxane)-modified poly(amic acid) films using dynamic contact angle measurements, NEXAFS and XPS pp. 1815-1831(17) Authors: Jin HO Kang; Kilwon Cho; Jin Kon Kim; Chan Eon Park; Sung-Jin Uhm; Bhanu Bhusan Khatua
Fatigue and failure behaviors of silver-filled electronically-conductive adhesive joints subjected to elevated humidity pp. 1833-1848(16) Authors: Rajesh R. Gomatam; Erol Sancaktar
Chemical modification of styrene–butadiene–styrene co-polymer by grafting of N-carbamyl maleamic acid pp. 1849-1860(12) Authors: V.L. Lassalle; M.D. Failla; E.M. Vallés; José Miguel Martín-Martínez
A new understanding on the mechanism of fountain solution in the prevention of ink transfer to the non-image area in conventional offset lithography pp. 1861-1887(27) Authors: Wei Shen; Brenda Hutton; Fuping Liu
